| |
 |
|
Calibration |
|
Each of our metal detector test pieces comes with a unique number that you can use
to view and print the Calibration Certificate online. |
|
 |
| |
|
|
|
Ordering |
|
Metal detector test sticks can usually be delivered from stock, however
maximum delivery delivery times should be 7-10 days. Sizes
from 0.5mm to 9.0mm are available in each of Ferrous, non
Ferrous and Stainless Steel.
To order please email or telephone/fax your requirements to:
T: +44 (0)1274 663311
F: +44 (0)1274 665511 |
|
|
|
| |
|
|
|
Custom design |
|
We can custom design test pieces in almost any configuration
to suit your production process, please call or email for
emails.
Pipeline test pieces
Freefall test pieces
Flexible test pieces
X ray test cards |
|
|
|
| |
|
|
Metal Detector Test
Pieces |
|
|
|
HACCP
and GMP demands that metal detectors are routinely QA tested
and the results recorded. Fundamental to this is the test
sample used. What's the point
of calibrating a metal detector with a non calibrated test
piece?
You can be sure that by using Inline supplied metal
detector test pieces,
fully calibrated and certificated, you will be demonstrating
your commitment to quality and due diligence.
|
|
Specifications
Our metal detector test pieces are the highest quality for metal detection
testing in the food and pharmaceutical industries! Each
clear test stick houses a sphere (the test piece) of either
ferrous, non-ferrous or 316 stainless steel, ranging from 0.5mm
to 9.0mm in diameter. The sphere is completely sealed
inside the Test piece and comes with a Certificate of Conformity
number clearly labelled on each stick, traceable to the source
of manufacture. For ease of use, our test pieces also have
a colour coded description detailing the size and type of the
sphere inside.
Calibrated metal detector test pieces supplied worldwide
|
Calibrated & Certificated bearings to BS EN ISO 9002 and
UKAS Calibration |
|
Colour coded for simple test stick visual verification |
|
Certification No. detailed on every test piece |
|
On-line traceability and printable certification |
|
Quality controlled spheres to ensure consistency |
|
Repeatable high quality products |
|
Cost effective solution
|
|
FERROUS: Chrome - Spherical test sample |
|
Standard: AFBMA GD100 |
|
Typical Physical and Chemical Composition: |
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
|
.95/1.10 |
.15/.30 |
.45 |
.025 |
.025 |
- |
1.30/1.60 |
- |
|
|
Hardness:
HRc 60-66 |
|
Sizes Available: 0.3 to 7.5mm
Colour Code:
RED |
|
|
|
|
NON-FERROUS: Brass - Spherical test sample |
|
Standard: AFBMA GD100 |
|
Typical Physical and Chemical Composition: |
|
Cu |
Pb |
Fe |
Zn |
|
.95/1.10 |
.15/0.30 |
.45 |
.025 |
|
|
Hardness:
HRB 75 Min |
|
Sizes Available: 0.5 to 9mm
Colour Code:
GREEN |
|
|
|
|
|
316
STAINLESS STEEL - Spherical test sample |
|
Standard: AFBMA GD100 |
|
Typical Physical and Chemical Composition: |
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
|
.08 |
1.00 |
2.00 |
.045 |
.03 |
10/14 |
16/18 |
2/3 |
|
|
|
|
|
|
|
|
|
|
|
Hardness:
HRc 25 - 38 |
|
Sizes Available: 0.5 to 8.0mm
Colour Code:
Dark Blue |
|
|
|
|
